Our Launch Services
Small Launches, Big Results
What we offer
just a brief overview
Hybrids traditionally keep the fuel and oxidizer in two different matter states, which prevents them mixing except under specifically controlled conditions. With Rocket Crafters’ STAR-3D™ design, both fuel and oxidizer are non-hazardous and can be handled at room temperature. This eliminates the risk of accidental detonation found in both solid and liquid rocket engines, making them significantly safer than their other two counterparts. The fuel for the engines is so safe in fact that some of Rocket Crafters’ staff have taken the fuel with them on airplanes as carry-on luggage without issue.
Throttleable Controls
The STAR-3D™ engines are so mechanically simple that they include only two moving parts, a main on/off valve and the throttle valve. The engines use differential pressure to maintain pressure in the oxidizer tanks: high-pressure Helium pushes the Nitrous into the engine; just like squeezing a tube of toothpaste. The engines can then be throttled by regulating the amount of oxidizer entering the engine, allowing thrust to be adjusted as needed.
Unlike Liquid Bi-propellent engines, the fuel in the STAR-3D™ engine serves as the main combustion chamber and there are no complicated expensive turbo-pumps and extensive plumbing lines. As a result, there are significantly fewer components necessary in the engine making the cost of production significantly lower. Because the engine itself is just plastic the total cost of materials is also less expensive. The unprecedented safety of the hybrid motors also contributes to significant cost savings, from cheaper transport and handling to significantly fewer parts to monitor during launch – and thus, fewer potential fail points.
The simplicity of STAR-3D™ engines prevents complications where moving parts could fail or not perform properly. With only two moving parts, our engine avoids failures associated with mechanically complex engines. In addition, because the fuel is 3D printed, the engines are nearly identical to each other; meaning that each one will perform the same as the next.

3D Printed
In addition to our revolutionary injection system, Rocket Crafters is producing fuel grains using our patent-pending, horizontal 3D printing method which reduces production time for orbital-class fuel grains to a matter of hours in a single section. Contrast this to the weeks or months required to produce traditional rocket engines. Through the synergistic relationship of plastic and metal 3D printing with the simplicity of the STAR-3D™ design, Rocket Crafters is capable of developing and manufacturing new engines of almost any size and scale in a matter of weeks instead of the years required for the more complicated Liquid Bi-propellent Engines or more dangerous Solid Rocket Motors
Our Services
The Future Of Space-Flight Products
STAR-3D Hybrid-Rocket Engines
The Future of Small Scale Launches

Hybrid rocket engines combine the best elements of both liquid-fueled and solid-fueled rockets, using either a liquid oxidizer and a solid fuel or vice versa. STAR-3D™ hybrid rocket engines use liquid Nitrous Oxide as the oxidizer and solid ABS (Acrylonitrile-Butadiene-Styrene) thermoplastic (a common consumer-grade plastic) as the fuel and combustion chamber. Using a solid fuel allows for greater energy density like that found in a solid rocket motor.  A liquid oxidizer allows the engine to be throttled by increasing or decreasing the flow of oxidizer into the combustion chamber, providing the control usually found in a liquid motor. Added to that, hybrid rocket engines are mechanically simple, needing only a handful of moving parts to operate.  In short, Rocket Crafters is building a simple rocket engine burning Laughing Gas and Legos. 

Rocket Crafters Launch Services
just a brief overview

We’re launching the first in a series of sub-orbital rockets this winter. We intend to announce the first commercial launch of our Intrepid-1™ rocket following those tests.

If you are interested in getting a copy of our Intrepid-1™ Payload Guide, please contact us at info@rocketcrafters.com and we’ll be in touch.

Small Scale
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum mattis ipsum vel mattis euismod. Praesent tristique auctor purus vitae sodales.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum mattis ipsum vel mattis euismod. Praesent tristique auctor purus vitae sodales.
Safe And Reliable
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum mattis ipsum vel mattis euismod. Praesent tristique auctor purus vitae sodales.
The Future Of Small Scale Launches
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum mattis ipsum vel mattis euismod. Praesent tristique auctor purus vitae sodales.
Variable Payloads
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum mattis ipsum vel mattis euismod. Praesent tristique auctor purus vitae sodales.
Multi-Mission Capable
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum mattis ipsum vel mattis euismod. Praesent tristique auctor purus vitae sodales.
Fast Missions
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum mattis ipsum vel mattis euismod. Praesent tristique auctor purus vitae sodales.
Launch And Mission Support
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Vestibulum mattis ipsum vel mattis euismod. Praesent tristique auctor purus vitae sodales.

The leader in space flight innovation.

rocket crafters logo

Our mission is to provide safe, reliable, cost-effective, and eco-friendly launch services. To revolutionize access to space and make it available to the rapidly growing small satellite market.  To do this we are developing Intrepid-1™, the world’s first mass-producible, ‘launch-on-demand’ small satellite launcher.

Contact Info

Phone: +1 (321) 222 0858

Email: info@rocketcrafters.com

Address: 770 Cidco Rd. Cocoa, FL 32926

Want the latest news? Want to hear about our latest launches and projects? Well join us on our newsletter and stay up to date on all the newest events!

Dale Coxwell

Dale Coxwell works in a dual capacity as both the CEO of Coastal Steel Manufacturing, LLC and the Executive Vice-President/Owner of Coastal Steel, Inc. The companies specialize in simple and complex structural, ornamental and miscellaneous steel erection and fabrication and provide services both nationally and internationally. The portfolios for both companies include NBCUniversal and Disney (world famous structures such as the Animal Kingdom Expedition Everest, Magic Kingdom Mission Space and the 90-foot tall Mickey’s Sorcerer’s Hat at Disney MGM Studios), as well as numerous companies in Aerospace & Defense (Lockheed Martin, NASA, and SpaceX) and Industrial Manufacturing.

Over his 35-year tenure in the industry, Dale has been integral to his companies’ receipt of many awards, which include the Jefferson Award, the US Small Business Administrator’s Award for Excellence, the Governor’s Business Expansion Award, the Key to the City of Cocoa, Florida, the Key to the City of Cape Canaveral, Florida and the 2012 Fifty Florida Companies to Watch Award.

At any one time, Dale serves on the Board or in an Advisory position with about 10 professional and community organizations.  He is a member of Economic Development Commission of Florida’s Space Coast and serves on its Industry Council. He is particularly proud of his work with the Ma-Chis Lower Creek Indian Tribe of Alabama – Economic Development Committee, and Scholarship Foundation. Dale maintains personal/corporate affiliations with AFL-CIO, SAME, SME and AISC.

Dale joined the RCI Advisory Board in August ’17.

David HosleyED.D, COL. USAF (RET)

Colonel David Hosley experienced a long and distinguished career with the United States Air Force. He started as an aviator at base level, culminating as Deputy Division Chief, Doctrine and Concepts Division, Headquarters, United States Air Force, Pentagon.

Along the way he was Director, Precommissioning Programs, Office of the Secretary of Defense as well as Assistant for Training and Education, Office of the Secretary of the Air Force. In both positions he was liaison with the White House, government agencies and departments, and congressional committees.

David commanded the Air Force Leadership and Management Development Center and the Center for Professional Development. As well, he was the Program Manager for Project Warrior, the Air Force wide cultural project to get the Air Force back to its basic roots. In this role David enjoyed personally working with the Air Force’s top leadership.

Upon retirement from the USAF, he built an FAA sponsored aviation program in Miami, Florida. Following that, the University of Central Florida needed a Program Manager for managing Department of Defense contracts. He then moved to the Space Shuttle Program where he became Director of Technical Training and then Executive Development for United Space Alliance.

Dave’s relationship with RCI developed as a result of his Board position on the Titusville-Cocoa Airport Authority.  He has been an Advisor to RCI since September ’13 and brings significant expertise in the area of government relations.


Grant Begley is an aerospace leader in the highly specialized fields of manned systems, unmanned systems, and robotic systems. As an aerospace executive and consultant, his work results in the enablement of next generation capabilities.  Begley is an accomplished initiator, developer, implementer and advisor of strategic planning, business development, resource obtainment, executive program management and technology insertion.

Grant, who has active security clearances, has enabled compelling new aerospace capabilities, future products and successes contributing to defense, national security and commercial applications for the federal government, Department of Defense, Lockheed Martin and Raytheon, state governments, defense industry and the global private sectors.

Grant has successfully led the development of National Space Programs, from concept, to achieving compelling operational capabilities.

As a Certified Acquisition Executive, Grant advises global executive clients on competitive positioning, performance, and resolution of complex challenges leading to dramatic improvements.

Grant contributed to the development of the “Roadmap for U. S. Robotics 2013”, a White House initiative, as opening speaker and Team Leader. He served as Pentagon Senior Advisor – for Unmanned Systems, to the Office of the Under Secretary of Defense.

In ’14 Grant became an Advisory Board Member for RCI.  He has been a member of the Executive Board since late ’15.

Michael Quatrini

Michael “Q” Quatrini is a true venture capital partner, who has extensive success in mentoring and investing in early and emerging stage companies. He brings over 20 years of experience in Portfolio Management with thorough business analytics, intensive due diligence and accurate valuation being the key to his venture capital transaction success.

He previously served as the President of Blackwood Holdings Group, and is currently concentrating his efforts as a “fundless sponsor” investing and syndicating Venture Capital projects, with several accredited and institutional investors, along with managing his family office and assisting a few other family offices to increase their returns on alternative investments.

Q joined the Advisory Board in August of 2018.

Mindy Howard, PHD

Dr. Mindy Howard earned her BS and MS in Industrial Engineering in the USA and her Ph.D. in Industrial Engineering and Management Science from Eindhoven University of Technology (Netherlands).  She founded and is the Director of Inner Space Training, a Netherlands company that develops and delivers training for commercial astronauts, to help them with psychological acclimation to the different flight phases, and optimizing conditions for creating peak performance and a peak experience in space.  Acknowledged as a Commercial Spaceflight Human Factors expert, Mindy has authored a number of publications and spoken to audiences at conferences, and to the media, on the subject.

Mindy has been an Advisor to RCI since March ’13.

Paul Kosieracki

After service as a Naval Officer, Paul Kosieracki earned an MBA in Finance from the U. S. International University. He was then employed by the Eastman Kodak Company for 30+ years, including 5 years as Executive VP and COO of Kodak Japan.  Kosieracki amassed very broad international business experience while conducting business in 40 countries managing large mergers, acquisitions, and divestitures globally.  As a Florida-licensed broker, in 2010 Paul established K&S Commercial, LLC,  which is a full service commercial brokerage company.  He presently provides consulting services, is an instructor at Eastern Florida State College (teaches courses on Business, International Business, Finance, and Entrepreneurship), and is on the Board of Directors for several privately held corporations.

Paul joined the RCI Advisory Board in early ’15.


Paul Larsen earned his BS in Engineering Management from the United States Air Force Academy, and his MBA from the Harvard School of business, specializing in Small Business Development and Small Business Operations.

Paul served for over 30 years as an Air Force and Federal Civil Service Price/Cost analyst, and a Procuring Contracting Officer (PCO); he held an unlimited warrant.

While with Air Force Material Command, Paul oversaw Contracting efforts for Minute-Man II Motor Wash-Out and Refurbishment; was Chief, Pricing and Finance Division; and President, University of Hill (Hill Air Force Base). Assignments during this time include Pricing Volume Manager for a complex $1.5b Air Force Pricing effort involving over 1,000 separate contract line items, each with four quantity ranges with firm fixed pricing for 10 years; Senior Price/Cost Analyst for major Program Depot Maintenance (PDM) contracts with European contractors to identify and repair structural and aircraft components for US jet fighter assets in the European Theater; working with several universities and colleges to improve and deliver education programs to Hill Air Force Base military and civilian employees; Pricing and Cost Analysis policy for the Command at Headquarters Air Force Material Command.

In ’10, Paul, Ron Jones, and Steve Edwards co-founded Rocket Crafters Inc. Today Paul serves as Vice Chairman and Treasurer. With his experience negotiating contracts and pricing, recruiting, managing, consulting and training government cost analysts, he brings to this position experience, leadership and focus that allows him to analyze and drive down costs to meet RCI’s financial and program goals.


Rob Fabian earned a BS in Space Operations from the United States Air Force Academy, beginning a distinguished 25-year military career in both space operations and ballistic missile maintenance.

Rob worked extensively with the Air Force’s ICBM fleets, leading field repair and sustainment efforts on both the Minuteman III and Peacekeeper missiles as well as coordinating operations between the ICBM repair depot, acquisition program office, and the supporting logistics supply chain.  As a space operations officer, his responsibilities spanned the gamut from day-to-day satellite tracking to planning and policy work at the highest levels of the government, including developing a 20-year roadmap for future space control system acquisitions and coordinating military and civil space policy issues across multiple Federal agencies.

In addition to his technical degree and extensive space and rocketry experience, Rob earned a Master of Public Administration from the University of Oklahoma and an MA in National Security and Strategic Studies from the Naval War College – Summa Cum Laude.  His work has been published in the Proceedings of the Naval Institute and Astropolitics: The International Journal of Space Politics & Policy and he spent a year as an Air Force Fellow at RAND.

After retiring from the Air Force in ’13 Rob joined Rocket Crafters’ Advisory Board as a subject matter expert in rocket motors, military acquisitions, and military space operations.  At the same time he began working with BAE Systems providing acquisition and program management assistance and advice to the Minuteman III ICBM program office, further deepening his insight into government acquisitions.

In March ’14 the company appointed Rob as Senior Vice President – Propulsion assuming responsibility for the company’s rocket engine development program.  Later that year he was appointed to the Board of Directors.  In the Spring of 2018 he was appointed as President of the company, expanding his focus to oversight of all day-to-day operations within Rocket Crafters while continuing his hands on leadership of the rocket engine development program.

Rob brings a proven track record managing the personnel, constrained budgets, and highly complex processes will be crucial in bringing RCI’s innovative new rocket motors to market.  His in-depth space operations and policy experience within the Department of Defense and across other Federal agencies will be of great help as the company continues to grow and expand its customer base.


Sean Mirsky is an expert in Macro Economic Event and Algorithmic Trading infrastructure.

He is the founder and CEO of the ZNES Group, which uses its resources to invest in forward looking “development stage” opportunities that typically have their roots in space commerce, yet have some meaningful connection to trading.

Prior to that, Sean developed and co-led the global microwave network efforts of Jump Trading as Director and Chief Architect, achieving superiority in speed between US and European Trading locations.  He also served as an embedded infrastructure specialist to key trading teams at Infinium Capital Management and Goldman Sachs.

On the Board of Directors of Rocket Crafters Inc., Sean is currently involved with commercializing patented 3D-Printed Rocket fuel and other breakthrough technologies for delivering Small Satellite (“SmallSat”) payloads to the precise orbit specified by each client.

Sean initially joined RCI’s Advisory Board, and in May ’16 was elected as a Board Member.


Sid Gutierrez earned a BS in Aeronautical Engineering from the United States Air Force Academy – Distinguished Graduate – and an MA in Management from Webster University. He is a graduate of the USAF Test Pilot School and has completed a number of executive management courses at UCLA, MIT and Stanford.  In the Air Force he flew the F-15, F-16, T-38 and many other aircraft while serving as a fighter pilot, test pilot, and instructor pilot.  Sid joined NASA as an astronaut in the mid-80’s and in the early ‘90’s he served as the Pilot of Space Shuttle Columbia (STS-40 Spacelab Life Sciences – SLS-1, a dedicated space and life sciences mission), and Mission Commander of Space Shuttle Endeavor (STS-59 Space Radar Laboratory  – SRL-1, part of Mission to Planet Earth). Both missions were recognized with the Aviation Week & Space Technology Laureate Award for outstanding achievement in the field of space.

Sid retired from the Air Force and NASA in ’94 and joined Sandia National Laboratories, where he served in various senior leadership positions.  As a Center Director he was responsible for programs introducing disruptive ideas and technologies into satellites, space payloads and sensors and vulnerability assessments and analysis tools.  He was responsible for a very successful half a billion dollar national security satellite system.  He led innovations in national programs including support to the nuclear fuel cycle and international efforts to reduce the threat of terrorism and the proliferation of weapons of mass destruction.

Recognizing the potential of Rocket Crafters’ innovative technologies and ideas, in ’12 Sid joined RCI as a member of the Board of Directors. Committed to changing the way we access space, in February ’15 he retired from Sandia to become the CEO of Rocket Crafters and Chairman of the Board. He is responsible for working with the RCI Team to establish and implement the goals and objectives of the company.  In addition to serving on the Board of RCI, Sid serves, or has served, on the boards of other for-profit corporations and a number of not-for- profit organizations, a state technical university, NASA’s Aerospace Safety Advisory Panel and a Presidential Commission.

William Macy

Bill Macy is a recognized Advanced Manufacturing expert.  His career includes being a former Boeing Phantom Works Engineer, and former Deputy Director at America Makes. Through his consulting firm, Macy Consulting, Bill is continuously pursuing the latest digital technologies to provide high quality, low cost solutions for complex manufacturing challenges.

Bill came on board as an Advisor to RCI in ’12.